From a sketch on paper to boards a factory can build. Borgfy designs the circuit, lays out the PCB, writes the firmware and builds the phone app — one team for the whole connected product, with prototypes in your hands in weeks.
Board, firmware & app from one team · NDA before day one · You own every design file
First prototype in
4–8 wks
Everything between the idea and the factory floor — designed by one team, documented so any manufacturer can build it.
Power, analog, digital and mixed-signal circuits, with parts chosen for price, lifetime and what distributors actually have in stock.
2 to 8-layer boards, controlled-impedance and high-speed routing, antenna keep-outs, and design-for-manufacture checks before anything goes to fab.
C and C++ firmware for ESP32, STM32, nRF52 and RP2040 — drivers, low-power modes, secure boot and over-the-air updates.
Bluetooth LE, Wi-Fi, LoRa and cellular devices that talk to a cloud dashboard and a phone app.
We order the boards, get them assembled, power them up, debug them and hand you working units.
3D CAD enclosures, 3D-printed prototypes and production designs ready for injection molding.
FCC, CE, UL, BIS, WPC and Gulf approvals planned from the first schematic, with pre-compliance checks before the lab.
Gerbers, BOM with second sources, pick-and-place files, test fixtures and instructions any contract manufacturer can follow.
Seven stages, one team, a dated plan before we start. You see real progress every week — renders, boards, then working units.
What the product must do, where it will live, how many you'll make and what each unit should cost to build. You get a written scope and a dated plan.
Block diagram, chip choices and power budget — checked against stock, lead times and your target unit cost.
Every circuit drawn and reviewed, with simulation where it matters: power, protection, sensors, radio.
Placement and routing for signal integrity, heat and manufacturability, closed out with design-rule and DFM checks.
Firmware written in parallel on dev kits so it is ready when the boards land — plus the companion app and cloud if the product needs them.
Boards fabricated and assembled, brought up, debugged and tested on the bench. We revise until it works.
Pre-compliance checks, test-lab coordination and a complete manufacturing package for your factory — or one we help you choose.
Most PCB shops stop at the board. Most app agencies won’t touch hardware. Borgfy builds all four layers of a connected product — so nothing gets lost between three vendors, and one team answers for whether it works.
Dashboards, alerts, data storage and AI that turns sensor readings into decisions.
The iOS, Android or web app your customers use to set up and control the device.
The code on the chip: sensors, motors, displays, battery life, security and updates.
Schematic, layout, power and radio — the physical product you can hold.
We design hardware for our own ventures before we design yours — board, firmware and app, end to end.
An ESP32-C3 lock with a fingerprint sensor, controlled over Bluetooth LE and Wi-Fi, running our own firmware and paired with an Android app we built for it.
A multi-panel e-paper display for mosques, built on an ESP32-S3 with multilayer PCBs and Bluetooth updates from a phone — designed for our Masjid Nearby venture.
Start with the design, stop at a working prototype, or hand us the whole product. You own every file either way.
A complete, manufacturer-ready design package — schematics, layout, BOM and production files. Your team or factory takes it from there.
We design, order, assemble and bring up the first boards, and hand you working units to test, demo and show investors.
Board, firmware, enclosure, app and cloud — carried through certification and the first production run with your manufacturer.
Startups with a first product, manufacturers adding connectivity, and companies replacing boards they import today.
Plain answers, no jargon.
Book a free 30-minute call and tell us what the product must do — a sketch, a competitor's product or an existing board is enough to start. We send a written scope and timeline within 24 hours, after signing an NDA.
A simple board can be designed in one to two weeks. A connected product with firmware usually reaches its first working prototype in four to eight weeks, including fabrication and assembly. Complex multilayer or certification-bound products take longer — you get a dated plan before any work starts.
Schematics, PCB layout source (KiCad or Altium), Gerbers and drill files, a BOM with alternate parts, pick-and-place and assembly drawings, a 3D model of the board, firmware source code and a test procedure — everything a contract manufacturer needs to quote and build.
Yes, and that is the main reason clients choose us. One team designs the board, writes the firmware and builds the iOS, Android or web app and the cloud dashboard, so nothing gets lost between three different vendors.
We design for certification from the first schematic — grounding, filtering, antenna placement and pre-certified radio modules where they help — run pre-compliance checks, and prepare the documents. The tests themselves are done by an accredited lab, which we coordinate with on your behalf.
Yes. We take over existing designs, replace obsolete or hard-to-buy parts, reduce unit cost, fix failures found in the field and re-spin the board for a new manufacturer.
You do. Schematics, PCB layout source files, Gerbers, BOM, firmware source code, enclosure CAD and app code are all handed over in your name, and we sign an NDA before you share anything.
A PRODUCT IDEA, OR A BOARD THAT NEEDS FIXING?
Free 30-minute call · NDA first · Written scope within 24 hours